Skip to content

Metal Studs: Sizes, Gauges and How to Choose

Metal Stud Sizes, Gauges and Selection

Choosing a metal stud begins with the work the wall or framing member must do. A stud for a short interior partition has a very different job from one resisting wind pressure in an exterior curtain wall. If you compare products by width or a familiar gauge label alone, two members that sound similar can deliver very different performance.

This guide gives you a practical way to narrow the choice. You will learn how to read a stud designation, separate structural from non-structural applications, compare web and flange sizes, and understand why mil thickness is often more useful than gauge. When your project requires metal studs for structural work, the final selection still belongs in the approved plans, calculations, and product data.

The practical goal is a clean decision path: identify the application, read the complete member designation, confirm the assembly requirements, and order the exact material your project team approved. That keeps procurement more predictable.

Read the Full Metal Stud Designation

A product code gives you more useful information than a description such as “six-inch, 18-gauge stud.” Once you know how to read the code, you can compare a drawing, submittal, quote, and delivery bundle without relying on a shorthand name that may leave out an important dimension.

Consider 600S162-43. Each part tells you something different about the member:

  • 600 identifies a nominal six-inch web depth. The web forms the broad back of the C-shaped stud and largely determines the wall cavity depth.
  • S identifies the member as a stud. Track is normally identified with a T, while other profiles use their own letters.
  • 162 identifies a 1-5/8-inch flange. The flange is the face that receives sheathing or other attached material.
  • 43 identifies a 43-mil design thickness, commonly called 18 gauge in cold-formed steel framing.

If you need a different web or flange, the corresponding digits change. A 362S162-43 member has a 3-5/8-inch web, the same 1-5/8-inch flange, and the same 43-mil thickness as the example above. That distinction matters when your plans call for a specific wall depth or when your sheathing, insulation, connections, and adjacent construction have already been coordinated around one profile.

You can use the same logic when reading track. In 600T200-43, the T identifies track and 200 identifies a two-inch leg. Stud and track need to be selected as a compatible system; matching the web depth while overlooking the track leg, thickness, or deflection detail can change how the assembly fits and behaves.

Our guide to metal stud nomenclature gives you additional examples for studs, track, slotted track, channels, and strapping. On your own schedule or order, keep the full designation intact. It creates a common reference for your estimator, our sales team, superintendent, installer, and design professional.

Start With Structural or Non-Structural Use

The first meaningful choice is the member category. “Non-structural” does not mean a stud carries no force. An interior partition still has to support its finishes and attachments, remain stable over its height, and resist the lateral pressure assigned to the wall assembly. The term means it is not part of the building’s load-bearing structural system.

Drywall metal studs for non-structural framing are commonly used for interior partitions and ceilings. If you are laying out offices, corridors, tenant spaces, or similar interior construction, your selection will usually depend on wall height, stud spacing, deflection criteria, gypsum layers, insulation, acoustic requirements, fire-rated assembly details, and the weight of supported finishes or fixtures. A taller wall or a heavier finish may move you to a deeper or thicker member even though the wall remains non-load-bearing.

Structural studs are used where the framing must resist structural loads identified by the project design. That can include axial load-bearing walls, exterior curtain walls exposed to wind, floor or roof framing, trusses, headers, and other engineered applications. An exterior curtain wall may be non-load-bearing relative to the primary building frame while still requiring structural studs to resist wind pressure and support cladding. The wall label alone therefore does not tell you which product category to buy.

Use these questions to place your wall in the right category before you compare sizes:

  • Does the member carry load from a floor, roof, header, or another part of the building?
  • Is the wall exterior or exposed to wind pressure?
  • Does the approved assembly or specification identify an ASTM standard, minimum mil thickness, yield strength, coating, or structural stud series?
  • Is the wall unusually tall, heavily finished, or required to meet a strict deflection limit?
  • Are openings, concentrated attachments, bracing, or movement joints part of the design?

If any answer points toward engineered performance, use the drawings, specifications, calculations, and approved submittal as your selection authority. You can still compare availability and pricing, but you should compare only members that meet the specified performance.

Choose Web Depth and Flange Width for the Assembly

Web depth is the dimension most people mean when they ask about metal stud size. Common drywall framing depths include 1-5/8, 2-1/2, 3-5/8, four, and six inches. Structural product ranges extend much deeper; our current catalog includes structural web sizes through 14 inches in many common thicknesses, with additional heavy-gauge options listed by profile.

Your web depth influences more than the finished wall thickness. A deeper member can provide more room for insulation, plumbing, electrical work, or other services. It can also improve the framing member’s capacity for a given thickness and spacing, although the actual result depends on the complete section properties, bracing, connections, unbraced length, and applied loads. For that reason, you cannot safely replace an engineered six-inch member with a shallower, thicker-looking option based on gauge alone.

For a typical interior partition, a 3-5/8-inch stud often gives you a familiar cavity for common wall layouts. A six-inch stud may suit a taller partition or a wall that needs more service space. Those are useful starting points, not universal rules. Your tested fire or acoustic assembly may require a specific framing depth, spacing, insulation, sheathing configuration, and fastener pattern. Treat that assembly as a system rather than selecting the stud in isolation.

Flange width also deserves attention. Non-structural drywall studs commonly use a 1-1/4-inch flange, while structural studs are available with wider flanges such as 1-5/8, two, 2-1/2, three, and 3-1/2 inches. A wider flange gives your installer a larger fastening surface and may be part of the required section properties or connection detail. Track legs vary too, particularly when your design uses deep-leg or slotted deflection track.

When you compare material, read the web and flange together. If your quote says only “six-inch stud,” ask for the complete designation. That one step helps you catch substitutions that fit the nominal wall depth but differ from the member shown in the project documents.

Sometimes the schedule gives you a performance requirement instead of one manufacturer-specific code. In that case, keep every controlling attribute together when you request an equivalent: member depth, flange width, design thickness, yield strength, section properties, coating, spacing, bracing, and deflection criteria. Your design professional may also need to compare the proposed product data with the basis-of-design member. A substitution is useful only when it satisfies the same approved conditions; a similar nominal size does not establish equivalent performance.

Compare Gauge by Its Mil Thickness

Gauge is convenient jobsite language, but mil thickness is the clearer comparison. One mil equals 0.001 inch, and the last number in a standard member designation usually identifies the design thickness in mils. A lower gauge number generally refers to thicker steel, so 16 gauge is thicker than 18 gauge. The complication is that “20 gauge” can describe more than one product class, and equivalent-gauge products can achieve required performance through a combination of thickness, steel strength, and profile design.

The table below summarizes common designations in the current US Frame Factory catalog. It helps you interpret a quote or takeoff; it does not replace the product data or engineering for your assembly.

Common labelDesignation thicknessTypical place in the current catalogWhat you should confirm
25 gauge15 milNon-structural drywall studs and trackProduct data, wall height, spacing, finishes, and assembly requirements
20 gauge EQ18 milNon-structural drywall studs and trackEquivalent-gauge listing, steel strength, and tested performance
22 gauge27 milHeavier non-structural framingApproved height, deflection, spacing, and finish loads
20 gauge structural33 milStructural studs and trackStructural series, loads, bracing, connections, and approved calculations
18 gauge43 milCommon light-structural framingComplete member size, loading, spacing, and coating
16 gauge54 milCommon light-structural framingComplete member size, loading, spacing, and connection design
14 gauge68 milCommon light-structural framingComplete member size, loading, spacing, and connection design
12 or 10 gauge97 or 118 milUltra-heavy structural membersEngineered profile, loads, connections, handling, and fabrication details

The difference between 18-mil 20-gauge EQ and 33-mil structural 20 gauge is especially important. Their shared gauge wording does not make them interchangeable. If a schedule calls for a 33-mil structural stud, an 18-mil EQ drywall stud is a different member intended for a different product category.

Your best check is the complete code and technical data. Compare the stated design thickness, minimum thickness, yield strength, section properties, coating, web depth, flange, and return lip where applicable. If a bid uses gauge alone, ask for the exact member designation before you compare it with another quote. You will get a more accurate cost comparison and reduce the chance of finding a specification mismatch after material reaches the site.

Check the Wall Conditions That Control the Choice

The stud is one component in a wall assembly. Your selection becomes more reliable when you work outward from the member and check the conditions that affect it. For a simple interior partition, that may be a short list. For an exterior wall, tall partition, or load-bearing application, it can require coordinated input from the architect, engineer, specialty engineer, our team, and installer.

Start with height and spacing. A stud that works at 16 inches on center may have different allowable behavior at 24 inches on center. The same member can also reach different limiting heights depending on lateral pressure, deflection limit, bracing, and sheathing contribution. If your project documents include a limiting-height table, use the table for the exact member, spacing, and design condition shown.

Next, consider what the wall supports and how it moves. Gypsum layers, tile, stone, cabinets, equipment, exterior cladding, and openings can affect the member or the connection design. Slotted track may be required at the head of a non-load-bearing wall so the structure above can deflect without transferring unintended axial load into the studs. Your installer then needs the correct gap and fastener placement for the detail to work.

Connections and bracing complete the load path. A thicker stud cannot compensate for an unsuitable screw, missing bridging, an unapproved splice, or a connection that was designed for a different flange. When your design includes cold-rolled channel, flat strapping, clips, headers, jamb studs, or backing, keep those items tied to the wall type in the takeoff.

Finally, confirm the environment and approved assembly. Coating requirements can vary with member type and exposure, while fire-resistance and acoustic performance belong to tested or evaluated assemblies rather than the stud alone. If you need a rated wall, follow the complete listed construction, including stud size and spacing, board type and layers, insulation, fasteners, joints, and other stated details.

This approach keeps your decision practical. At the purchasing stage, focus on checking that the product being quoted and delivered matches the conditions already established for your project.

Turn the Approved Design Into an Accurate Order

Once the member selection is approved, your next job is to preserve it through pricing, takeoff, fabrication, and delivery. Begin with a wall-type schedule or material list that uses full member designations. Include track, jambs, headers, bracing, clips, fasteners, deflection components, and accessories under the wall types where they belong.

Length planning can reduce field cutting and waste, particularly when your elevations and opening conditions are well defined. Custom-length studs can also simplify staging because your crews receive members closer to the dimensions they need. Before you finalize lengths, account for the approved head-of-wall gap, track configuration, floor tolerances, and any fabrication limits. Your nominal wall height is not automatically your cut length.

Coordinate these items with us before releasing the order:

  • the exact stud and track designations, including mil thickness;
  • required lengths, quantities, bundles, labels, and sequencing;
  • the latest drawings, wall schedule, addenda, and approved substitutions;
  • product data and submittals needed before procurement;
  • coating, steel strength, or certification requirements in the specification;
  • accessories and connections included in our scope; and
  • delivery access, unloading responsibility, storage area, and installation sequence.

If you are pricing before the framing design is complete, label assumptions clearly. A budget based on one stud size, spacing, or wall height can change once wind pressure, finish loads, rated assemblies, openings, and deflection requirements are confirmed. Separating an early allowance from a final material release helps your team understand which numbers are ready for purchasing.

Plan a receiving check as well. Your field team should be able to match bundle tags and product markings to the purchase order before installation begins. Confirm the member code, length, quantity, and visible condition while the bundles are organized. When a discrepancy appears, keeping the material identifiable and separate makes it easier for our team and your project team to resolve it without mixing an unverified member into the work.

You can review our current steel framing product catalog to see available stud, track, slotted track, channel, and strapping designations. For your actual order, compare that product data with the latest project documents and resolve discrepancies before fabrication begins.

Choose Metal Studs With US Frame Factory

The most useful conversation with our team starts with your application and complete member designation. If you have plans, a wall schedule, or a takeoff, we can help you review the requested web depths, flanges, mil thicknesses, lengths, and related framing components. We manufacture structural and non-structural studs and track, including custom-length members, and can assist with project pricing, product data, submittals, estimates, and delivery planning.

For an early budget, bring us the project location, approximate quantities, wall heights, and the assumptions behind your stud selection. For a construction order, send the current approved documents and identify any walls that require structural calculations, rated assemblies, deflection track, bracing, special coatings, or coordinated accessories. That gives our team a clearer basis for checking availability and preparing the material package while your design professionals retain responsibility for the final specification.

At US Frame Factory, we can help you turn an approved framing design into a clear order for shipment throughout the United States. Contact us with your plans, takeoff, or member list, and we will help you confirm the product information, quantities, custom lengths, and delivery details needed for your project.

Leave a Reply

Your email address will not be published. Required fields are marked *