Skip to content

Framing and Components for Storage Buildings

US Frame Factory sells framing and components for storage buildings, such as Cees, Zees, Channels, Steel Angles, Eave Struts, Hat / Furring Channels, b-metal decking, clips, screws, and custom structural angels. Our roll-forming capabilities are flexible and produce exactly what your optimized engineering plans require.

Purlins for metal Framing

Cee and Zee Purlins, also called metal studs are the main load bearing structural components in multi-level self storage buildings. They’re cost effective, space efficient, and fire resistant. You can build up to 10 floors with them. The coating is either red oxide or G60+ galvanization. The purlins in a C shape also known as metal studs are typically used in support the walls of the upper floors and create partitions. The Z shape is used horizontally to build ceiling/floor system and distribute load over the C studs purlins. Below is our product list with all the custom sizes in-between.

Cee, track & Zee production range
Thickness:20-10 gauge (33 mil to 138 mil)
Websize:1-5/8″ to 14″
Flange Size:1-1/4″ to 6″
Coating:Red Oxide, G60, or G90 galvanized coating
US Frame Factory manufacturing production range
Cee and Zees used in a mutli-floor self storage facility thats under  construction
Zee shapes being used to Span between columns of Cee shapes

Member SizeGaugeCEE CodeZEE Code
1-5/8″ x 1-5/8″18162S162-43162Z162-43
1-5/8″ x 1-5/8″16162S162-54162Z162-54
2-1/2″ x 1-5/8″18250S162-43250Z162-43
2-1/2″ x 1-5/8″16250S162-54250Z162-54
2-1/2″ x 1-5/8″14250S162-68250Z162-68
4″ x 2″16400S200-56400Z200-56
4″ x 2″14400S200-68400Z200-68
4″ x 2″12400S200-97400Z200-97
4″ x 2″10400S200-118400Z200-118
4″ x 2.5″16400S250-56400Z250-56
4″ x 2.5″14400S250-68400Z250-68
4″ x 2.5″12400S250-97400Z250-97
4″ x 2.5″10400S250-118400Z250-118
5-1/2″ x 2″16550S200-54550Z200-54
5-1/2″ x 2″14550S200-68550Z200-68
5-1/2″ x 2″12550S200-97550Z200-97
5-1/2″ x 2″10550S200-118550Z200-118
5-1/2″ x 2-1/2″16550S250-54550Z250-54
5-1/2″ x 2-1/2″14550S250-68550Z250-68
5-1/2″ x 2-1/2″12550S250-97550Z250-97
5-1/2″ x 2-1/2″10550S250-118550Z250-118
6″ x 2″16600S200-54600Z200-54
6″ x 2″14600S200-68600Z200-68
6″ x 2″12600S200-97600Z200-97
6″ x 2″10600S200-118600Z200-118
6″ x 2-1/2″16600S250-54600Z250-54
6″ x 2-1/2″14600S250-68600Z250-68
6″ x 2-1/2″12600S250-97600Z250-97
6″ x 2-1/2″10600S250-118600Z250-118
6-1/2″ x 2″16650S200-54650Z200-54
6-1/2″ x 2″14650S200-68650Z200-68
6-1/2″ x 2″12650S200-97650Z200-97
6-1/2″ x 2″10650S200-118650Z200-118
6-1/2″ x 2-1/2″16650S250-54650Z250-54
6-1/2″ x 2-1/2″14650S250-68650Z250-68
6-1/2″ x 2-1/2″12650S250-97650Z250-97
6-1/2″ x 2-1/2″10650S250-118650Z250-118
7″ x 2″16700S200-54700Z200-54
7″ x 2″14700S200-68700Z200-68
7″ x 2″12700S200-97700Z200-97
7″ x 2″10700S200-118700Z200-118
7″ x 2-1/2″16700S250-54700Z250-54
7″ x 2-1/2″14700S250-68700Z250-68
Member SizeGaugeCEE CodeZEE Code
7″ x 2-1/2″12700S250-97700Z250-97
7″ x 2-1/2″10700S250-118700Z250-118
7″ x 3″16700S300-54700Z300-54
7″ x 3″14700S300-68700Z300-68
7″ x 3″12700S300-97700Z300-97
7″ x 3″10700S300-118700Z300-118
8″ x 2-1/2″16800S250-54800Z250-54
8″ x 2-1/2″14800S250-68800Z250-68
8″ x 2-1/2″12800S250-97800Z250-97
8″ x 2-1/2″10800S250-118800Z250-118
8″ x 3″16800S300-54800Z300-54
8″ x 3″14800S300-68800Z300-68
8″ x 3″12800S300-97800Z300-97
8″ x 3″10800S300-118800Z300-118
8″ x 3-1/2″16800S350-54800Z350-54
8″ x 3-1/2″14800S350-68800Z350-68
8″ x 3-1/2″12800S350-97800Z350-97
8″ x 3-1/2″10800S350-118800Z350-118
10″ x 2-1/2″141000S250-681000Z250-68
10″ x 2-1/2″121000S250-971000Z250-97
10″ x 2-1/2″101000S250-1181000Z250-118
10″ x 3″141000S300-681000Z300-68
10″ x 3″121000S300-971000Z300-97
10″ x 3″101000S300-1181000Z300-118
10-1/8″ x 3″141013S300-681013Z300-68
10-1/8″ x 3″121013S300-971013Z300-97
10-1/8″ x 3″101013S300-1181013Z300-118
11″ x 3″141100S300-681100Z300-68
11″ x 3″121100S300-971100Z300-97
11″ x 3″101100S300-1181100Z300-118
11″ x 3-1/2″141100S350-681100Z350-68
11″ x 3-1/2″121100S350-971100Z350-97
11″ x 3-1/2″101100S350-1181100Z350-118
12″ x 2-1/2″141200S250-681200Z250-68
12″ x 2-1/2″121200S250-971200Z250-97
12″ x 2-1/2″101200S250-1181200Z250-118
12″ x 3″141200S300-681200Z300-68
12″ x 3″121200S300-971200Z300-97
12″ x 3″101200S300-1181200Z300-118
12″ x 3-1/2″141200S350-681200Z350-68
12″ x 3-1/2″121200S350-971200Z350-97
12″ x 3-1/2″101200S350-1181200Z350-118
12″ x 4″101200S400-1181200Z400-118

Structural Angel

L Angle for steel framing in a Self storage building
L Angle available from 14 to 20 gauge.
Red oxide steel L angle used for self storage construction
18 gauge L angle used to brace studs

Structural angel is primarily used for reinforcement in self storage buildings. It’s made of the same coils as Cee & Zees so you can get it in Red-Oxide, G60, or G90. The web-width can range from 1.5″ to 12″ and the leg can range from 1″ to 2.5″

  • Reinforce the top track of walls: This will increase load bearing capacity of track and allow for weight to be distributed more evenly. Especially useful in self storage construction when the dead loads per SF often exceed 100LBS/SF.
  • Providing a larger surface area to attached sheathing: Screw angles into the side of a stud to allow to increase the structural surface area.
  • Concrete pour stops: Concrete pours stop a necessary around the edges of the building.
  • Angle Clips: Many headers require angle clips to better connect them with the king studs and jack studs.
Angle SizeAngle CodeGauge
1-1/2″ x 1-1/2″150L150-4318
1-1/2″ x 1-1/2″150L150-5416
2″ x 2″200L200-4318
2″ x 2″200L200-5416
6″ x 2″600L200-4318
6″ x 2″600L200-5416
10″ x 2-1/2″1000L250-4318
10″ x 2-1/2″1000L250-5416
We can manufacture more angles than listed here just contact sales.
Structural AngleProduction Range
Thickness:20-14 gauge (33 mil to 68 mil)
Web-size:1-1/2″ to 12″
Flange Size:1-1/4″ to 2.5″
Coating:Red Oxide, G60, or G90 galvanized coating

Hat / Furring Channels

Common light-gauge steel hat / U Channel used in framing. Especially for furring out walls or providing an additional surface to drill on.
Typical hat channel profile
Hat channel used as a surface to attached corrugated metal panels to
Hat channel used as a surface to screw metal panels.

Furring or hat channels are used to brace load bearing studs together and create a surface between studs to attached sheathing to. They’re typically no larger 18 gauge. They typically come in a 7/8″ depth or a 1-1/2″ depth. A few of their other applications are.

Moisture Control: They create a gap between the wall material and the building’s exterior, allowing airflow, which helps to prevent moisture buildup and improve insulation.
Wall Framing: Hat channels help create a stable framework for installing interior wall panels, especially when attaching drywall or other finishing materials.
Stud Bracing: Use hat channels to increase the horizontal strength of studs together.

Furring CodeCommon NameFurring CodeCommon Name
87F125-157/8″ Furring Channel 25 Gauge150F125-151.5″ Furring Channel 25 Gauge
87F125-187/8″ Furring Channel 20 Gauge EQ150F125-181.5″ Furring Channel 20 Gauge EQ
87F125-337/8″ Furring Channel 20 Gauge Structural150F125-331.5″ Furring Channel 20 Gauge Structural
87F125-437/8″ Furring Channel 18 Gauge150F125-431.5″ Furring Channel 18 Gauge

Flat Sheet

CFS-Gusset Plate Bottom Detail for shear wall in light gauge steel framing
CFS-Gusset Plate Bottom Detail for creating a shear wall in steel framing
Galvanized flat strapping used to brace metal studs
Galvanized flat strapping used to brace metal studs

Flat sheet is almost exclusively used for bracing. It’s can be especially efficient as its such a low profile so it won’t interrupt and type of surface cladding on the exterior. It will arrive at your job-site in coils which can be easily cut to length.

Clips and Accessories for Self Storage Buildings

Moment Clip used to brace a vertical load-bearing purlin on the first floor of a self-storage building
Moment Clips bracing a steel purlin
Angle clips or L clips used to brace the floor
Angle clips used with C channels to brace the roof

The most common clips are Angle Clips, Anchor Clips, Moment clips and deflection clips between HSS Steel. We sell all these directly to framers from our portal clips.usframefactory.com. The following are the most common used in self storage buildings.

  • Anchor clips: Anchor clips attach steel studs, tracks, or wall panels to the concrete foundation or slab, ensuring that the framing system is firmly anchored and doesn’t shift or move.
  • Moment clips: Moment clips transfer not just vertical loads (gravity) but also horizontal and rotational forces. This prevents parts of the frame, such as beams and columns, from rotating or bending under stress.
  • Angle Clips: Angle clips are used a reinforcement for headers and ceiling systems.
Light-guage steel framing for a muti-floor self stories facility in Sarasota, Florida
Framing a for a 3 floor self storage facility in Sarasota, Florida.

Optimizing for cost on multi-level self storage buildings built

Optimizing your framing cost for self storage buildings involves minimizing the amount of steel used and ease of assembly. The best to optimize for the amount of steel used to first have a an experienced light-gauge steel engineer design the plans. From there use a manufacture who can make all custom profiles as specified. We as a manufacture often time the steel market for large purchases and buy during the dip. We have saved manufacturers 30-40% on steel framing costs. We’re happy to recommend engineers to work with.

Another way to save on cost per unit is optimize space by minimize demising wall thicknesses. For example, you can build with a 6″ wall with 600S162-54 or you can perhaps build it with 400S200-54(4″ studs). You’d be saving 2 inches of space per demising wall. This could add up to a few extra storage units with the space saved. We can manufacture down to 16 ga 1-5/8″ studs to create the smallest possible walls.

To optimize for ease of assembly use on market clips with pre drilled holes and other framing accessories. Finding the cheapest most practical clips and anchors before hand have you engineer work those into the plans, products from The Steel Network and Clark Dietrich tend to be cheaper than their Simpson Counter Parts.

Multi-level Self Storage building under construction in Katy, Texas. Using Red-oxide coated light-gauge steel framing.
Multi-level Self Storage building under construction in Katy, Texas.

Should you use Red-Oxide or just Galvanized Metal for my storage buildings?

Red-Oxide is a rust inhibiting primer applied to metal studs. It’s made using iron oxide, which gives it its distinctive reddish-brown color. While galvanizing steel is hot-dip galvanization, where the steel is submerged in a bath of molten zinc. As the steel cools, the zinc forms a metallurgical bond with the surface, creating a protective coating. The zinc serves as a sacrificial layer, meaning that even if the coating is scratched or damaged, the zinc will corrode before the steel, prolonging the life of the structure. A G90 or G60 Galvanized steel coating will last longer than Red-Oxide but its typically slightly more expensive than red-oxide primer. We recommend going with a Galvanized G70 coating.

Contact

Feel free to contact Tiago Atwi (337-255-3843 Louisiana, tiago@usframefactory.com ) or contact anyone on the sales page.

Additional Recourses

Engineered Metal Trusses

Metal Stud and Wood Framing Accessories and Clips - US Frame Factory

Get fast delivery of clips and framing accessories straight to your jobsite from ClarkDietrich, Simpson, and The Steel Network. Competitive pricing and free shipping on large orders. Fast shipping on all orders. High quality product and amazing technical customer service. Build your next project with US Frame Factory.

What Screws to Use for Metal Studs
Frequently asked Metal Stud / Steel Framing Questions